NEMA 4/12/4X Emergency Escape Hatch Switch (Does Not Lock Door) - CJA-N4-TOCHS
NEMA 4/12/4X Emergency Escape Hatch Switch (Does Not Lock Door) - CJA-N4-TOCHS
This device mounts on top of the elevator and when installed and wired correctly will allow the elevator to run with when the emergency escape hatch is closed and prevent it from running when the escape hatch is open. Because all elevator emergency escape switch hatches can vary from elevator to elevator, spacers, brackets may need to be made in the field to accommodate the various site specific requirements you may run into.
Lead Time: 3-5 Days
****PLEASE NOTE THIS DEVICE DOES NOT LOCK THE HATCH DOOR****
SPECIFICATIONS
Sensor Type: Magnetic (Coded Magnet)
Number of Circuits Controlled: 2
Switch Starting Position: 1 Off (Normally Open) and 1 On (Normally Closed)
Industry Designation: DPST-1NO/1NC
Switching Current @ Voltage: 0.5 A @ 120 V AC/120 V DC
Maximum Voltage: 120V DC/120V AC
Input Voltage: 120V DC/120V AC
Maximum Sensing Distance: 0.2"
Wire Connection Type Wire: Leads
Wire Leads Number of: 4
Wire Length: 3 ft.
Switch/Coded Magnet Length: 3.5"
Width: 1"
Height: 0.5"
Housing Material: Plastic
Fasteners Included: No
Number of Holes: 4
Hole Diameter: 0.2"
Environment: Washdown, Temporary Submersion
Environmental Rating: NEMA 4/12/4X/IP67
Specifications Met :UL Listed, CSA Certified, CE Marked
Required Products: Coded Magnets ***WILL NOT WORK WITH A REGULAR MAGNET***
