CG Gate Switch - 1 Normally Open Contact (Specify Hand)
CG Gate Switch - 1 Normally Open Contact (Specify Hand)
***Please Note This Device Does NOT lock the gate or elevator door. DO NOT USE AS A DOOR LOCKING DEVICE!***
Lead Time: 3-4 Weeks Depending On Quantity
Models Available / Specifications
Standard Heavy Duty Model -CJA Listed - Elevator Electric Contact Rating: Maximum Voltage & Switching Current @ Voltage: 2 A @ 250VAC
Designed and manufactured to prevent dust and water form entering the unit.
Equipped with a hermetically sealed contact which is rated for Class 1, Division 2, Groups A,B,C&D locations.
Product Support/Additional Documents
Please contact sales@cjanderson.com if you have any questions or need additional information.
Items Required To Make This Device Work
This is a Normally Open Contact Switch which makes or closes when the operating lever is forced inward. It contains sturdy, self wiping copper to carbon contacts to work at up to 250 volts AC or DC.
This cast gray iron switch is designed for use with Single, Vertical Lift Up Sliding Gates. When the gate is closed the contact is made. When the gate is up the contact is open, it is maintained in the open position by compression springs and the force of gravity. Because of this gravity action the switch can only be mounted one way. Therefore, it is manufactured for Left or Right Hand applications.
The hand is determined by standing inside the elevator looking out. The side on which the lock is to be mounted (left or right) is the hand to be ordered.
